Overview
Device elements
Figure 1
1 Support for spray lance
2 Recess for detergent suction hose
3 Recessed grip (both sides)
4 Wheel
5 Connection for water supply with filter
6 Water supply set
7 O-ring set (for replacement)
8 High pressure connection
9 High pressure hose
10 Spray lance
11 High-pressure nozzle (stainless steel)
12 Pouring vent for detergent
13 Steering roller with fixed position brake
14 Fuel sieve
15 Safety latch of the hand spray gun
16 Hand spray gun
17 Power supply
18 Tool bag (HDS C only)
19 Pouring vent for fuel
20 Dosage valve for detergent
21 Operating field
22 Storage for hand spray gun
23 Connecting hose of the hose drum
(HDS CX only)
24 Step depression
25 Hose drum (HDS CX only)
26 Hand crank for hose drum (HDS CX only)
27 Handle
28 Nameplate
29 Cover lock
30 Storage compartment for accessories
31 Burner
32 Recess for spray pipe
33 Cover
34 System care Advance RM 110/RM 111
35 Pressure/quantity regulation of the
pump unit
36 Oil tank
37 Oil drain screw
38 Backflow valve of the detergent infeed
39 Detergent suction hose with filter
40 Fuel filter
41 Fastening clamp
42 Hose of the lack of water fuse
43 Water shortage safeguard
44 Sieve in the water shortage safeguard
45 Fine filter (water)
46 Float tank
Operating field
Figure 2
A Power switch
1 Indicator lamp rotation direction
(3-phase appliances only)
2 "Ready for use" indicator lamp
3 Fuel indicator lamp
4 Indicator lamp service
– The operating elements for the cleaning
process are yellow.
– The controls for the maintenance and
service are light gray.
Symbols on the machine
High-pressure jets can be dan-
gerous if improperly used. The
jet may not be directed at persons, animals,
live electrical equipment or at the appliance
itself.
Risk of electric shock!
Only electricians or authorised
technicians are permitted to
work on parts of the plant.
Risk of burns on account of hot
surfaces!
Risk of poisoning! Do not
breathe in the exhaust fumes.
– 2
EN
Colour coding
21