Hörby Bruk 4154 Instrucciones De Montaje página 2

ASSEMBLY INSTRUCTIONS
 Assembly should be completed by adult person(s). We intend for our products to bring joy not frustration.
 One hex wrench is included for tightening the eye bolts.
Step 1
Insert one curved metal tube with foam through the swing cover sleeve. Before inserting
the remaining tubes, note the direction of the first tube. All narrow ends of tube will fit into
wider opening end of an adjoining tube. Insert the remaining three tubes.
Step 2
Insert all narrow ends of tube into wider end of adjoining
tube, making sure to align the overlapping holes.
Step 3
Pull the eye bolt ends of each rope through the slots.
Slide one regular washer and one lock washer onto the eye bolt.
Then, insert the eye bolt through the holes formed at the tube's connection points.
Step 4 & 5
Add washer and nut to the bottom side of tube bolt and secure. Tighten with wrench.
Repeat steps 3, 4 and 5 on remaining three straps with remaining three screw ends.
Pull the hook/loop straps back over the tubing frame and attach to the hook/loop
fastener on underside of swing.
Step 6 & 7
Clip the carabiner through both a-rings at the end of each
rope set and tighten. Lastly, place the buckle on the
Teepee Tent cover through the carabiner. Buckle to secure
and tighten.
2
2