Elmo QBiC MS-1 Guía De Puesta En Marcha página 7

All manuals and user guides at all-guides.com
PREPARATIONS
CHARGING
This camera has a built-in battery.
*The battery cannot be removed by the user.
*The battery is not fully charged at the time of purchase.
Charge the battery before using the camera for the first time.
1. Turn off the camera. Charging is not possible
while the power is on.
2. Open the Interface Terminal Cover. Connect the
micro B connector (smaller connector) of the
supplied USB cable to the USB port of the camera.
3. Connect the USB plug of the USB cable to a USB
port on your computer. Battery charging will start.
The [Power LED] turns red while charging.
4. Battery is fully charged when the [Power LED]
turns off.
About AC adapter (Option)
When using the camera with your computer by
connecting them with the USB cable, a long time
continuous operation is not possible as the power
level will gradually decrease over time.
In such cases, we recommend you to use the
optional AC adapter. (Make sure to use the
proprietary AC adapter otherwise the camera may
not start properly with the commercially available AC
adapter.)
7