Worx Professional JAWHORSE WU060 Manual Del Usuario página 12

unit.
Note: Some operations such as hand sawing or planing exert
enough pressure to cause the JAWHORSE
situations, it is acceptable to hold the JAWHORSE
standing on the foot plate. (See Fig.R)
When clamping large or heavy materials, provide outboard
support. Never step on the footplate to prevent JAWHORSE
from tipping over, especially when using power tools. (See
Fig.Q)
8
CLAMPING SQUARE TUBING
Clamp square tubing or similar material either on the diagonal or flat
side. Use the jaws to securely hold your material. (See Fig.S)
9
REMOVING THE JAW FACINGS (See Fig.T)
The jaw facings can be removed to achieve a greater clamping
range, replace if worn or damaged, or when fitting the optional
jaws.
Remove the screws in the center of jaws, the jaw facing (13, 14)
can be pulled off from the jaw by hand.
Optional accessories
1) WELDING STATION (See Fig.U)
The welding station helps to hold items while welding. The thick
walled cast aluminum jaws can hold the larger part. The holding arm
clamps the second part that is to be welded onto the larger part, and
more importantly, accurately positions it.
All manuals and user guides at all-guides.com
to slide. In these
TM
TM in place by
TM
10
2) LOG JAW WITH CHAIN SAW CLAMPING VICES (See Fig.V-X)
Suitable for gripping logs or poles, and holding the chainsaw for
sharpening. These steel jaws also bolt onto the standard steel jaws
and are zinc plated for corrosion resistance.
Chain saw clamping blocks pivot back out of the way when not in use
and pivot forward when required.
Logs or poles up to 300mm in diameter are gripped firmly for chain
sawing, drilling, rabbeting etc.
The chain saw clamping vice makes an ideal clamp to hold a
chainsaw while sharpening the teeth. Two pairs of vices, either side
of the bar, ensure the clamping jaws are clear of the chain, which can
then be rotated as each tooth is filed.
3) TOOL BAG
Tool bag provides a convenient place to hold tools and other bits and
pieces.
Maintenance
Your tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your tool. Never use water or
chemical cleaners to clean your tool. Wipe clean with a dry cloth.
Always store your tool in a dry place.