Problem Solving - Chacon 34045 Manual De Uso

b) AWAY mode: Enter your 4-digit code, then press the «2» button. You will hear a «beep» to indicate that the alarm
will enter the «Away» mode after 30 seconds.
NOTE: In this case, if someone opens the door or window equipped with the opening detector or enters the field of
vision of your motion detector, the alarm will be triggered. This mode is also available on the remote control.
c) Emergency mode: Press buttons 1 and 4 simultaneously in case of emergency. An alarm will sound without time
limit to scare off intruders.
7. Reset pairing
In order to reset your entire alarm, remove the batteries from your device. Then press and hold the learning button
(see diagram point 1.). When you reinsert the batteries, you will hear two «beeps» indicating that the reset was
successful.

8. Problem solving

1. False alarms from the main unit
a) Check that there are no animals near the motion detector.
b) In hot weather, moving shadows may also activate the alarm. Also ensure that the detector is not installed near a
radiator or heat source.
c) Check that there are no devices with strong electromagnetic fields near the door/window sensor. Strong electro-
magnetic fields can cause false alarms.
2. The main unit doesn't receive a signal from the transmitter
a) Check if the pairing between the transmitter and the main unit was successful.
b) If pairing was successful, check the battery voltage of the main unit and transmitter. Low voltage will result in
product failure.
3. No alarm sounds after a detection
a) Check if the low battery indicator is flashing (please replace the batteries immediately).
b) If the unit is armed and set to HOME mode and the PIR sensor detects an intrusion, the alarm will not sound. The
PIR sensor is disabled in HOME mode. Check if the main unit is installed correctly.
9. Add a device to your existing alarm
We have created a 100% compatible alarm system to meet your needs.
Here, we offer accessories that can work alone but also as a kit. This allows
you to personalise your alarm and to associate several accessories but also
several alarms between them. For example, when a person triggers the
opening detector, all your alarms will sound. You can deactivate your alarm
using the code units, remote control or the remote keyboard.
More information on our website: https://chacon.com/fr/
Compatible products: 34035, 34036, 34038, 34043, 34044, 34046, 34048
EN