Hand pump
a
a Mount the pump on the pump support with:
4 x hex screws M6 x 20
4 x spring washer A6
4 x washer A6.4
b
b Remove the protective cap from the discharge hose.
Fit connector with seal to the suction side of the
pump.
c Connect the filling hose with discharge elbow to the
pressure side of the pump.
All manuals and user guides at all-guides.com
c
Hand pump
with meter
a Fit pump with meter on the pump support using:
4 x hex screws M6 x 20
4 x spring washer A6
4 x washer A6.4
b
b Remove the protective cap from the discharge hose.
Fit connector with seal to the suction side of the
pump.
c
c Connect the filling hose with discharge elbow to the
meter.
GB
a
5