Read Before Use; Montage / Usage - JAP Bionic Breeze Edmonton AC-E Manual De Instrucciones

Read before use

Carefully read the warning and safety precaution.
Check the product for any visible damage. If any, contact japproducts as soon as possible.

Montage / Usage

Before using this appliance please assemble it following the instructions below step by step.
Place the wheels one by one in the air cooler and tighten with the supplied wrench. (Fig 2.A)
1.
2. Open the wind-guide strips carefully by pressing the top of the strip. Note: if these strips are
not open, the air cooler will not function correctly. (Fig 2.B)
Ice packs are filled with ice crystal. Freeze these in the freezer. Once frozen, place the ice
3.
packs in the water tank. Note: The colder the water can get, the colder air is blown. The
addition of extra cooling elements is allowed.
Fill the water tank, water level in the tank should be beneath MAX and over MIN.
4.
Note: To completely remove the water tank, the pump can be detached. When placing the
water tank, the water tank must be reattached. (Fig 2.C)
fig. 2A
6
fig. 2B
fig. 2C