Breaking In The Pump - Husky H1504FK-R Manual Del Usuario

ACCESSORY HOOK
Insert the accessory hook on his seat (fig. 3).
ATTACHING HOSE
Insert the hose into the quick coupler already installed
on the compressor (Fig. 4).
Make sure the air compressor is off and unplugged.
Rotate pressure regulator knob fully counterclockwise.
WARNING:
Do not attach any tools to the open end of the hose until
start-up has been completed.
Firmly grasp the open end of the hose; hold facing
away from yourself and others.

BREAKING IN THE PUMP

See figure 5 - 6
Check and tighten all bolts, fittings, etc.
Turn the pressure regulator knob fully clockwise to
open the air flow.
Place the switch in the OFF (0) position and plug in the
power cord.
Open the drain valve completely.
Place the switch in the ON ( l ) and run the air
compressor for 10 minutes to break in pump parts.
Place the switch in the OFF (0) position.
Close the drain valve.
All manuals and user guides at all-guides.com
ASSEMBLY
12
PRESSURE
REGULATOR KNOB
ON (I)
SWITCH
OFF (0)
DRAIN VALVE
DRAIN VALVE
Fig. 3
QUICK COUPLER
Fig. 4
Fig. 5
Fig. 5
Fig. 6