Lenco DIR-200 Manual Del Usuario página 25

To search for a station, press OK
as the device scans the FM band. Alternatively, you can scan up or down
by pressing and holding the buttons
5.7.1. Preset
To store a FM preset, press and hold PRESET
the remote control until the display shows the Save preset screen.
Select one of the 10 presets to save the current station.
To select a preset, press PRESET
control briefly, then select one of the listed preset stations. The
screen will show
You can store up to 10 of your favourite stations to the memory. This
will enable you to access your favourite stations 1-0 quickly and easily
by using the number buttons on the remote control.
5.7.2. Now playing information
While the stream is playing, the screen shows its frequency, or if RDS
information is available, station name and any further RDS
information such as programme name, track title and contact details
will also be shown. Stereo broadcasts are indicated with an icon at
the top of the screen. To view further information about the
broadcast, press MENU/INFO
control.
Each time you press
which cycling through RDS text, further RDS text (station/programme
type), frequency and today's date.
5.7.3. Settings
OK OK. The frequency display starts to run up OK
PRESET PRESET on the device or PRESET
n ( 1,
MENU/INFO
MENU/INFO MENU/INFO on the device or INFO
, another set of information is displayed,
25
or
PRESET PRESET PRESET on the device or
2 etc) at the bottom right.
INFO
INFO on the remote INFO
.
on
on the remote