Manual Operation - Lippert 285318 Manual De Instalación Y Del Propietario

Manual Operation

NOTE: In the event of loss of power, the power tongue jack
can be operated manually.
1. Manually unhitching from tow vehicle:
A. Chock the tires of the trailer.
B. Be sure the footpad of the power tongue jack is
pinned securely in place with the clevis pin and hairpin
cotter pin (Fig.7B).
A
B
Fig.7
C. Make sure the ground surface under the power tongue
jack is firm and level.
D. Open the rubber plug (Fig.8A) on top of the power
tongue jack's gearbox to expose the manual drive shaft.
A
Fig.8
lippert.com 432-LIPPERT (432-547-7378)
Power Tongue Jack
Installation and Owner's Manual
(For Aftermarket Applications)
E. Insert the socket end of manual crank handle (Fig.9A)
into the manual drive shaft.
A
Fig.9
F. Turn the manual crank handle (Fig.9B) clockwise until
trailer is supported and the coupler clears the hitch ball.
G. Move the tow vehicle away from the trailer.
H. Lower the trailer until it is level by turning the manual
crank handle counterclockwise.
I. Remove the manual crank handle (Fig.9).
J. Replace the rubber plug (Fig.8A).
2. Manually reconnecting to tow vehicle:
A. Chock the tires of the trailer.
B. Be sure the footpad of the power tongue jack is pinned
securely in place with the clevis pin and hairpin cotter pin
(Fig.7B).
C. Open the rubber plug (Fig.8A) on top of the power
tongue jack's gearbox to expose the manual drive shaft.
D. Insert the manual crank handle (Fig.9) into the manual
drive shaft.
E. Turn the manual crank handle counterclockwise until
the coupler properly mounts the hitch ball and the leg of
the power tongue jack (Fig.7A) is fully retracted.
F. Remove the manual crank handle (Fig.9).
G. Replace the rubber plug (Fig.8A).
NOTE: Make sure the leg (Fig.7A) of the power tongue jack
is fully retracted prior to moving the tow vehicle.
6
CCD-0004287
B
Rev: 02.16.22