KS Tools efuturo universal Instrucciones De Uso página 11

efuturo universal pro:
Use the power button to select the maximum charging current. Select the charging current before plugging in the charging
plug (vehicle side).
Use the time setting key to select between 1 and 12 hours (or inactive). This allows you to set how long your charging
process will last. Select the charging time before plugging in the charging plug (vehicle side).
Use the time delay key to start the charging process at a later time. With this function, you can charge your vehicle at
night when electricity is often cheaper. Here too, you can choose between 1 and 12 hours or inactive. Select the time
delay before plugging in the charging plug (vehicle side).
Ending charging process
• As soon as the vehicle is charged, end the charging process
• Ending the charging process on the vehicle
• Disconnect Type 2 plug on vehicle side
• Disconnect power supply to the charging cable
• Put the protective cap on the plug on the vehicle side
• Coil up the charging cable without kinks
• Stow the charging cable properly in the vehicle
Status of the light emitting diodes (LEDs)
efuturo universal:
1 5
6
2
3
4
efuturo universal max:
1
2 3
OPERATING INSTRUCTIONS
efuturo mobile charging station
7 8
4 5 6
1
Status
2
Operating mode
3
Charging mode
4
Fault
1
LED display status
2
Separated mode
3
Connected mode
5
LED display status
6
Switched on
7
Charging
8
Fault
4 Charging mode
Charging finished
5
Fault
6
5