4moms 4m-002-002 Instrucciones página 11

All manuals and user guides at all-guides.com
Instructions for Use
1.
Turn on the faucet water and position the fl ow of water
over the Water Collection Area.
(Never run water directly into the Reservoir or the Bathing
Area, as the product will not be able to measure the
temperature of the water.)
2.
Press the On/Off button below the Digital LCD Display
Screen to turn the Display on.
(Note: The Display can be turned off manually by pressing
the On/Off button.)
3.
Observe Digital LCD Display Screen for current water
temperature.
4.
Adjust the hot/cold faucet handles in your sink or bathtub
until a comfortable water temperature is achieved.
5.
Check water temperature with hands as an added
precaution.
6.
Plug or unplug the Lower Sidewall Drain Hole to adjust
the water level so that it is comfortable and safe for baby.
Ensure that the water does not reach a level that would
jeopardize the safety of the baby.
7.
Once a comfortable water temperature and level have been
achieved, it is safe to place baby in the Tub.
8.
When you have fi nished bathing your baby, you can unplug
the drain holes in the Reservoir and Bathing Area to drain
the water.
9.
The Digital LCD Display will turn off automatically if no
water fl ow is detected for 15 minutes. You can manually
turn off the display by pressing the On/Off button.
English
8