Simon, Evers & Co K 116 585 Instrucciones De Servicio página 28

VI. Maintenance of the jack:
1. When not in use, the jack should be stored fully collapsed.
2. The outer movable parts should be oiled regularly.
3. Lubricate the guides with Molykote or a similar grease.
4. Avoid using and therefore mixing different types of oil. We recommend the use of
hydraulic oil conforming to ISO VG22.
5. In the event that spare parts are required please identify the parts required from the
exploded drawing and order accordingly.
VII. Troubleshooting:
Jack cannot be pumped
1 up properly.
Jack can
2
released down at the
top position.
Jack can not be pumped up
3
to its rated highest position
4
The oil has leaked,around
the plunger.
The relase valve is not closed
not be
The release valve is not opened
enough.
Oil is not enough.
Seals are worn out.
1. Screw in the unload handle
(16) tightly in clockwise
direction.
2. Loose th screw (37) to release
the air from the pump,then
screw in it tightly.
Screw out the unload handle (16)
in counter - clockwise direction
Screw out the screw (10),add
hydraulic oil.
Replace worn seals with new seals
(08) and (09)