Standard Mode; Modifying The Amount On A Number Button; Random Length Key - Better Packages VARIO 555eMA Manual De Instrucciones

Note:

2.2.1 Standard Mode

To dispense a 15cm tape, press the <15> button once. Remove the piece of tape.
Press the <REPEAT/START> button at the bottom, left of the keypad. This will also
dispense a 15cm tape.
Press the <25> button and a 25cm piece of tape will be dispensed. Remove the
piece of tape and press the <REPEAT2/ENTER> button at the bottom right of the
keypad. A 25cm piece of tape will again be dispensed. Remove the piece of tape and
press the <REPEAT/START> button. A 15cm piece of tape will be dispensed. In this
way, any two lengths can be memorised by the unit's electronics and can be
repeated using the <REPEAT/START> and <REPEAT2/ENTER> buttons.

2.2.1.1 Modifying the amount on a number button

a) To dispense tape longer than the amount on a number button
Press the <+> button and then the <15> button. Not 15 but 17cm is dispensed.
Press the <+> button once for each 2cm you want to add to a number button.
You can press this button as many times as you want before you press the
number button. For example: To dispense 47cm press the <+> button once
and then press the <45> number button. A 47cm length of tape is dispensed.
b) To dispense tape shorter than the amount on a number button
Press the <-> button and then the <15> button. Not 15 but 13cm is dispensed.
Press the <-> button once for each 2cm you want to subtract from a number
button. You can press this button as many times as you want before you press
the number button. For example: To dispense 43cm press the <-> button once
and then press the <45> number button. A 43cm length of tape is dispensed.
c) To dispense a length of tape twice the length of a number button
See a) and b). The only difference is that the number button is doubled.

2.2.1.2 Random Length Key

Press and hold the manual feed button (down and arrow) until the desired length of
tape is dispensed.
HADE VARIO 555eMA
If you press a combination of keys that doesn't work, the system
lets you know by beeping three times. If this happens, re-enter
the key or combination of keys to produce the length or lengths
that you inquire.
Detailed operation
page 5