Storage And Maintenance - Poppstar 1008894 Manual De Instrucciones

UK
Instructions for use
1. Compare the specifications of all the devices you want to use to ensure their compatibility.
The voltage (in volts) of the device must match with the power supply (if the power supply provides more voltage than the
device requires, this may result in damage. If the voltage is too low, the device will not work).
The specified amperage (in amps) of the power supply is the maximum amount of amperage. If your device requires a higher
amperage than the power supply can provide, the power supply may be damage.
2. Set the output power using the key according to the device's specifications.
3. Select the correct adapter plug.
4. Connect the plug to the power supply, taking into account the polarity of the device:
You will find the corresponding symbol on the casing of your device or in the manual. Most devices work with positive polarity,
i.e. with the positive pole on the inner contact.
Device with positive pole
The + signs of the power supply and
the adapter plug point towards each
5. Connect your device to the power supply.
6. Then plug the power supply or the plug of the cable into the socket.
7. Disconnect both plugs after use.

Storage and maintenance

• Store the product in a cool and dry place.
• Use a dry and soft cloth for cleaning the product, do not expose it to cleaning agents or chemicals!
Liability
Poppstar GmbH is not liable for personal injury or property damage caused by incorrect installation, use or maintenance.
other.
Device with negative pole
The + sign of the power supply points
to the - sign of the adapter plug.