Lenco PB-610 Manual Del Usuario página 9

•The spare battery is suitable only to a limited extent for charging larger tablet computers and other devices with similarly high
battery capacities. Charging these devices fully is not possible.
•If you connect mobile devices with a power consumption of less than 85 mA to be charged, the spare battery switches itself
off automatically after a short time, because it does not recognize the device – see section "Problems/solutions".
Charge status display
While charging, the blue indicator lights show the current battery capacity on the charging display (25% – 50% – 75% – 100%):
If all four indicator lights are off, the spare battery is completely empty and must be charged again before the next use.
To see the charging status of the spare battery, briefly press the On/Off button once. The charging status will be shown for
approx. 10 seconds.
Reset
Electromagnetic radiation around the spare battery can cause it to malfunction. If the spare battery is not functioning correctly,
switch it off for a few seconds and then back on:
1.Press the On/Off button once briefly to switch the spare battery on. The indicator light lights up.
2.Press and hold the On/Off button until the indicator lights go out.
3.Press the On/Off button once briefly to switch the spare battery on again. Done!
LED light
To switch the light on, briefly press the On/Off button twice.
To switch the light off, briefly press the On/Off button again twice.
All manuals and user guides at all-guides.com
09
EN
NL
DE
FR
ES