PNI MIKE 65 Manual Del Usuario página 4

Pairing microphone and Bluetooth adapter
Note: The microphone and the adapter are factory paired.
1. When the CB radio is turned off, insert the Bluetooth adapter into
the RJ45 connector of the radio (instead of the microphone).
2. Turn on the radio and wait for the adapter to enter pairing mode.
The LED starts flashing red and blue.
3. Turn on the Bluetooth microphone by pressing and holding the
M key. You will hear the prompt "Power on". The LED on the
microphone will flash red and blue until the connection between
the microphone and the adapter is made.
4. Once the connection is established, you will hear the prompt
"Connected". The LED on the microphone will flash blue.
5. Press the PTT key to transmit.
Pair mobile phone, Bluetooth microphone and adapter
1. Pair your Bluetooth microphone with your mobile phone:
Nota: Turn off the radio before pairing the microphone with the phone
• Turn on the Bluetooth microphone by pressing and holding the M key.
You will hear the prompt "Power on". The LED on the microphone
will flash red and blue until the connection between the microphone
and the adapter is made.
• Turn on Bluetooth function on your mobile phone. From the list of
Bluetooth devices, select PNI Mike 65.
• Once the connection is established, you will hear the prompt
"Connected". The LED on the microphone will flash blue.
USER MANUAL
4