Lacont 90 Manual De Instrucciones página 11

Always lift the cabinet from the side or the rear and never from the door side. The carrying
surface of the hand truck, fork-lift truck or similar must have at least the same area as the base
of the safety cabinet.
6. Installation
The safety cabinet must be installed, operated and maintained in such a way that employees
are safeguarded from the risks of fires and explosions.
See assembly instructions (inside cabinet door).
7. Interior fittings
7.1 Shelves
• Installed according to assembly instructions (inside cabinet door)
7.2 Pull-out shelves
• Already built into cabinets
7.3 Shelves
• Already built into cabinets
Please observe the maximum shelf load (see Annex 1)!
If the shelves are not installed in accordance with the assembly instructions then the
maximum shelf load cannot be guaranteed.
7.4 Collection trough / Perforated cover plate
The collection troughs in the base of the storeLAB
intended to collect any liquid leakages inside the cabinet and are not additional support
surfaces for stored containers (see EN 14470-1).
If a perforated cover plate is used for the collection trough / pull-out shelf then this can be used
as additional support surfaces for stored containers.
8. Storage amounts / Storing substances together
Valid national regulations must be observed.
12
® safety cabinet or the pull-out shelves are