General Use; Intended Use; Table 1 Technical Data - HanseLifter SDJ Serie Instrucciones De Uso

Technical data
Manufacturer (abbreviation)
1.1
1.2 Manufacturers type designation
1.4 Operator type: hand, pedestrian, standing, seated, order-picker
1.5 Load capacity/rated load
1.6 Load centre distance
1.8 Load distance, centre of drive axle to fork
1.9 Wheelbase
2.1 Service Weight
Tyres: solid rubber, superelastic, pneumatic, polyurethane
3.1
Tyre size, front
3.2
Tyre size, rear
3.3
Wheels, number front rear (x = driven wheels)
3.5
Tread, front
3.6
Tread, rear
3.7
4.2 Height, mast lowered
4.3 Free lift
4.4 Lift
4.5 Height, mast extended
4.9 Height of tiller in drive position min./max.
4.15 Height, lowered
Overall length
4.19
Length to face of forks
4.20
Overall width
4.21
Fork dimensions
4.22
Fork-carriage width
4.24
Distance between fork arms
4.25
Ground clearance, laden, below mast
4.31
4.32 Ground clearance, centre of wheelbase
4.35 Turning radius
5.2 Lift speed, laden/unladen
5.10 Service brake

General use

The high-lift truck of the SDJ series is designed to transport and lift loads. Loads may be transported over short
distances and loads may be lifted up to the model-specific lifting height for storing in and removing from
shelves. The high-lift truck of the SDJ series is a platform floor truck that can be used in a versatile and reliable
manner.
Please always observe the load graph attached to the platform floor truck.

Intended use

Please use the platform floor truck only to transport goods respectively loads. The platform floor truck must only
be used in dry rooms with flat floors. Keep the platform floor truck away from moisture and wet conditions. If the
device made contact with rain for example, dry the platform floor truck immediately and grease all moving parts
at the designated grease nipples. Furthermore any contact with dust, sand, or other abrasive and aggressive
materials should be avoided. Please ensure that no belts or ropes get caught in the wheels.
Keep the platform floor truck away from aggressive and dirty environments.
When working, please observe that the floor has sufficient load-carrying ability.
SDJ10 – Series
Q (t)
c (mm)
x (mm)
y (mm)
kg
b (mm)
10
b (mm)
11
h (mm)
1
h (mm)
2
h (mm)
3
h (mm)
4
h (mm)
14
h (mm)
13
l (mm)
1
l (mm)
2
b (mm)
1
s/e/l (mm)
b (mm)
3
b (mm)
5
m (mm)
1
m (mm)
2
WA (mm)
mm

Table 1 Technical data

Duplication, even in parts, is not permissible.
HanseLifter HanseLifter HanseLifter
SDJ1012 SDJ1016 SDJ1025
Hand Hand Hand
1.0 1.0 1.0
600 600 500
730 730 730
1280 1280 1280
200 230 276
polyurethane polyurethane polyurethane
150x40 150x40 150x40
83x60 83x60 83x60
2/4 2/4 2/4
620 620 700
385 385 385
1730 1980 1850
1085 1440 330
1110 1510 2410
1750 2080 3000
500-1100 500-1100 500-1100
90 90 90
1705 1705 1705
555 555 555
755 755 860
55/170/1150 55/170/1150 55/170/1150
565 565 565
550 550 550
25 25 20
40 40 40
1400 1400 1400
20 20 20
manual manual manual
HanseLifter
1.1
SDJ1030 1.2
Hand 1.4
1.0 1.5
500 1.6
730 1.8
1280 1.9
316 2.1
polyurethane
3.1
150x40
3.2
83x60
3.3
2/4
3.5
700
3.6
385
3.7
2090 4.2
330 4.3
2910 4.4
3505 4.5
500-1100 4.9
90 4.15
1705
4.19
555
4.20
860
4.21
55/170/1150
4.22
565
4.24
550
4.25
20
4.31
40 4.32
1400 4.35
20 5.2
manual 5.10
Page 10 of 22