Connecting The Display; When Connecting A Dvi-D Connector Compatible Display; When Connecting A Monitor Connector Compatible Display - Sony Vaio VGP-UPR1 Manual De Instrucciones

Connecting the display

Notes
Before connecting a display to the product, first install

the software of the supplied installation CD (page 5).
This product has two connectors, the MONITOR

connector and the DVI-D connector, for display
connection. The connector to use depends on the type
of display. For information, refer to the instruction
manual of the display.
The DVI-D connector and the MONITOR connector

cannot be used simultaneously.
When a personal computer is connected, a maximum

of two screens can be displayed, including the LCD of
the personal computer.
The maximum output resolution of the product is

1680 × 1050 pixels. However, depending on the
connected display, images may be displayed in lower
resolution.
The connected display will be identified as the third

display in the Windows' "Display Settings" screen.
Depending on the software you use, the contents may

not appear correctly on the connected display.
Output from the product will be usable through

Extended Desktop Mode.
10
GB
When connecting a DVI-D
connector compatible display
1
Insert the display cable into the DVI-D
connector of the product.
Note
The DVI-D connector of this product does not comply

to the requirements of HDCP (High-bandwidth
Digital Content Protection).
When connecting a MONITOR
connector compatible display
1
Insert the display cable into the
MONITOR connector of the product.