Examples Of Use - Powerfix Profi+ Z22855 Instrucciones De Utilización Y De Seguridad

All manuals and user guides at all-guides.com
j
Press the inch / mm key
(inch or mm) you wish to use. Either "mm" or "inch" will
appear to the right of the figures in the LCD display
j
Press the key to obtain the zero setting (ZERO)
to reset the LCD display
Measuring an object from the outside:
j
Move the external measuring jaws
handwheel
7
Place the external measuring jaws
be measured.
j
Turn the handwheel
Move the external measuring jaws
touch both sides of the object you want to measure. Please
ensure that you do not damage the object you want to
measure by subjecting it to too much pressure.
Measuring an object from the inside:
j
Place the internal measuring jaws
you want to measure.
j
Turn the handwheel
internal measuring jaws
on both its inner sides. Please ensure that you do not dam-
age the object you want to measure by subjecting it to too
much pressure.
Measuring the depth of an object:
j
Move the depth-measuring blade
j
Put the depth-measuring blade
the surface (e.g. inside a hole).
j
Slide the body of the calliper downward until you feel
resistance.
j
Ensure that you do not damage the depth-measuring blade
or the object you want to measure by exerting too much
6
pressure on them.
j
The LCD display
j
After carrying out the measurement, move the external
measuring jaws
again by turning the handwheel
j
Switch the LCD display
ON / OFF key
Tip: The LCD display
after approx. 3 minutes.
j
Tighten the locking screw
until you feel some resistance.

Examples of use

Q
Tip: When measuring, always proceed as described in the
chapter on using the calliper.
79033_ES-IT-PT_Content.indd 33
to set the unit of measurement
3
to zero.
5
apart by turning the
11
outwards anti-clockwise.
against the object to
11
inwards clockwise.
7
together until they
11
against the object
2
outwards anti-clockwise. Move the
7
apart until they touch the object
2
out of the calliper.
6
in position until it touches
6
now displays the dimensions.
5
/ internal measuring jaws
11 2
inwards clockwise.
7
off again by pressing the
5
.
10
automatically switches itself off
5
again by turning it clockwise
4
.
5
in order
9
together
GB/MT 33
20/09/2012 10:15:01