Parts Description; Intended Use - Probuilder 43660 Manual De Instrucciones

Parts description

1. Transport handle
2. Power On/Off switch
3. Compressor housing
4. Quick-action coupling (regulated
compressed air)
5. Pressure hose
6. Power cord
6
3
4
Unpacking
• Open the packaging and carefully
remove the device.
• Remove the packaging material as well as
packaging/transport locks (if present).
• Check that all items covered by the scope
of delivery are complete.
• Check the device and accessories for any
transport damage.
• If possible, keep the packaging until the
warranty period has expired.
1
2
5
CAUTION!
The device and packaging materials are not
toys for children!
Children must not be allowed to play with
plastic bags, foils and small parts! There is a
risk of swallowing and suff ocation!

Intended use

The compressor serves to generate
compressed air for compressed-air-operated
tools that can be operated with an air volume
of up to approx. 180 l/min (e.g. tire in� ators,
blow guns and paint spray guns).
Due to the limited air � ow rate, it is not
possible to operate tools that have a very
high air consumption (e.g. orbital sanders,
bar grinders and impact wrenches).
The machine may only be used according to
its intended purpose. Any other use beyond
this is not in compliance with the intended
purpose.
The user/operator, and not the
manufacturer, is liable for any damage or
injury of any kind resulting from such not-
intended usage.
Please note that our devices are not
designed or intended for commercial, craft or
industrial use.
We do not assume any warranty for the
device if it is used in commercial, craft or
industrial operations and/or in equivalent
activities.
GB
69