Repeat Playback - Teac MC-DX40 Manual Del Usuario

To check the programmed order
In the stop mode, press the MEMORY button repeatedly. The
track number and program number will be shown on the display.
To add a track to the end of the program
In the stop mode, press the MEMORY button repeatedly until "00"
or "000" appears on the display. Select a track number using the
skip button (. or /) and then press the MEMORY button.
The track is added to the end of the program.
To overwrite the program
In the stop mode, press the MEMORY button repeatedly until the
program number to be changed appears on the display.
Select a new track number using the skip button (. or /)
and then press the MEMORY button.
To clear program
If one of the following buttons is pressed, the programmed contents
will be cleared:
open/close (L), FUNCTION, FM/AM, STANDBY/ON
<
If the unit is disconnected from the power supply, the
programmed contents will be cleared.
All manuals and user guides at all-guides.com
Every time the REPEAT button is pressed, the mode is changed as
follows:
<
When the stop button (H ) is pressed the repeat mode is
cancelled.
<
During the programmed playback, "Rf" cannot be selected.
Repeat one track/file (R1)
The track/file being played will be played repeatedly. If you select
another track/file in R1 mode, the track/file you selected will be
played repeatedly.
If you select R1 mode in the stop mode and select a track/file, the
selected track/file will be played repeatedly.
Repeat folder (Rf) (Only MP3/WMA disc)
All the tracks or files in the folder will be played repeatedly.
If you select another folder in Rf mode, the tracks/files in the
folder will be played repeatedly.
Repeat all (Ra)
All the tracks or files will be played repeatedly.
<
In the program mode, the programmed contents are played
repeatedly.

Repeat Playback

x
R1 (repeat one track/file)
x
Rf (repeat folder)
(flashing, only MP3/WMA disc)
x
Ra (repeat all)
x
(Repeat off )
19