Lutron Homeworks SC-XN-SW Instrucciones De Instalación

Use these instructions to install the model numbers listed.
Contents Included with the Josh.ai Ready Wallplate
1 Adapter with Screws
1 Cradle
1 Wallplate
4 Screws
Important Notes
For use with Josh Nano.
Install in accordance with all national and local electrical codes.
Lutron recommends that wallstations be installed by a qualified electrician.
Do not connect high-voltage power to low-voltage terminals. Improper wiring can result in personal injury or damage to the
control or to other equipment.
Environment: Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0 to 90% humidity, non-condensing. Indoor use only.
Cleaning: To clean, wipe with a clean damp cloth. DO NOT use any chemical cleaning solutions.
Wallboxes: U.S. style wallbox: 3.7 in (95 mm) H × 1.8 in (46 mm) W × 2.8 in (70 mm) D.
1. Use the adapter screws to attach the cradle to the 2-gang plastic adapter.
Note: To install the cradle and Josh Nano on the left opening of the wallplate
simply flip the adapter and cradle assembly upside down.
2. Attach the keypad to the other side of the adapter using the supplied adapter
screws. Please reference the relevant keypad installation instructions posted on
www.lutron.com
3. Attach the adapter, cradle, and keypad assembly to the 2-gang wallbox.
Install Josh Nano into circular opening in wallplate. Please reference
www.josh.ai/setup/nano for wiring and installation instructions.
4. Press the wallplate onto the adapter until you hear an audible click.
Please refer to the troubleshooting section of your keypad install guide.
For troubleshooting information regarding the Josh Nano, please reach out
to help@josh.ai.
Josh.ai Core and Nano sold separately.
The Lutron logo, Lutron, Claro, seeTouch, Pico, and HomeWorks are trademarks or registered
trademarks of Lutron Electronics Co., Inc. in the US and/or other countries.
All other product names, logos, and brands are property of their respective owners.
© 2022 Lutron Electronics Co., Inc.
P/N 043575 Rev. A
02/2022
Installation Instructions
Please Read Before Installing
Compatible Low-Voltage Keypads
SELV / PELV / NEC Class 2
®
HomeWorks QS Wired seeTouch Designer (HQWD-*)
Pico (PJ2-*)
Adapter
Keypad
Josh Nano
Wallplate
Claro
Wallplate
SC-XN-SW
SC-XN-MN
SC-XN-SW
SC-XN-MN
Cradle
Cradle
Lutron Elec tron ics Co., Inc.
7200 Suter Road
Coopersburg, PA 18036-1299