Settings
World Phone
(Menu 9.6.1)
When the America (850/1900) option is selected the
device can be used in the US, and when the Europe
(1800) option is chosen the device can be used in
European countries.
This phone does not automatically search and set the
GSM frequency. Instead the user must manually set the
frequency band based on his/her location. The default
setting is "America (850/1900)" so in order to switch
to the European frequency, simply select the "Europe
(1800)" option from the World Phone Setting menu.
After the selection, turn the phone off and on again to
begin using the new frequency setting. When traveling
to different parts of the world, you must always set the
World Phone Setting to the correct frequency band.
GPRS Attach
(Menu 9.6.2)
If you select Power On and you are in a network that
supports packet data, the phone registers to the GPRS
network and sending short messages will be done via
GPRS. Also, starting an active packet data connection,
for example, to send and receive e-mail, is quicker. If
you select When Needed, the phone will use a packet
data connection only if you start an application or
74
action that needs it. The GPRS connection is closed
after it is not used by any application.
Note
n
If there is no GPRS coverage and you have chosen Power
on, the phone will periodically try to establish a packet data
connection.
Reset Default
You can easily reset your phone to its default
configuration. To do so, proceed, as follows.
1. Select the Reset Settings menu option.
2. Enter the 4-digit phone password.
Note
n
The password is preset to 0000.
Menu 9.7