ECRON BL9320 Manual De Instrucciones página 45

INSTRUCTIONS FOR USE
Before first use
1. Before using the blender for the first time, unpack the
appliance and place all the parts on a horizontal surface.
2. The jug (including the measuring cup, the lid, the seal ring
1, the jug, the seal ring 2, the blades and the jug base) has
already been mounted on the motor compartment. Remove
it to wash all the removable parts, except the motor
compartment. Refer to the last chapter (CARE AND
CLEANING).
3. Once you have cleaned and dried all the parts thoroughly,
EN
put them back to their position.
1) Place the jug upside down on an even surface. Holding it
by the handle, place seal ring 2 and the blades on the lower
part of the jug base and fix the blades into position by
turning them in an anti-clockwise direction until they are
tightly fixed. (see Fig.3)
2) Fit the jug in place so that its opening is positioned
upwards. Place seal ring 1 around the lower part of the lid
and place the lid on the jug. Place the measuring cup so that
it fits perfectly into the lid, fitting the small extended areas at
45