Oxygenics Star Warsa Darth Vader Instrucciones Para La Instalación

EASY INSTALLATION
INSTRUCTIONS
STEP 1 STEP 2
Remove your Remove any
existing shower remnants of old
head. To remove, plumber's tape
turn the existing and flush out
shower head in a shower pipe for
counterclockwise 5 to 10 seconds.
direction.
STEP 4 STEP 5
In a clockwise Attach grooved
direction, screw end of hose to
handheld holder handheld holder
onto the taped and hand tighten.
portion of shower
arm. Hand
tighten only.
ATTENTION:
WASHERS PRE-INSTALLED IN HOSE ENDS
Washers must be inserted into both hose ends for proper installation.
EASY TWIST
SPRAY SELECTION
Enjoying multiple spray patterns
during your shower has never
been easier. With
the Darth Vader
Handheld Shower
Head easy twist
design, simply
rotate the shower
head for a quick
spray change.
Darth Vader
™
Shower Head
STEP 3
Wrap plumber's
tape clockwise
3 or 4 turns
around threaded
end of shower
arm.
STEP 6
Attach smooth end
of hose to base
of handheld and
hand tighten. Insert
your new handheld
shower in holder.
USING THE
COMFORT CONTROL
Located on the back of
the shower head, the
flow control regulator
eliminates sudden blasts
of water. Note: The flow
control is not a shut off valve. When turned to the
lowest position, the shower head continues to
flow. This is a normal safety feature. Unit may be
in lowest flow position during shipping. Check the
position of flow control upon installation.
Handheld
NO TOOLS
NEEDED
For use with automatic
compensating valves rated at
5.678 L/min (1.5 gpm) or less
STOP!
THIS PRODUCT TO THE STORE.
If you need installation assistance, replacement
parts or have questions regarding our warranty
please contact customer service at
1.866.440.9257
1.775.420.5600
or
email at support@oxygenics.com
Business Hours: Monday-Thursday 7:00 am to 5:00 pm PST
NEED HELP?
PLEASE DO NOT RETURN
Support is also available via
Be sure to visit our
website at oxygenics.com
Friday 7:00 am to 4:30 pm PST
oxygenics.com
© & ™ LUCASFILM LTD.
© DISNEY