Playing Repeatedly (Mp3 Disc); Use The Usb - Vieta Home VH-MS470BT Manual De Usuario

1. Rotate the SOURCE button on the unit or press the
CD button on the remote control. The word "DISC" will
be displayed on the front panel.
2. Press the button to open the disc door and place
the MP3/WMA disc on the disc tray.
3. Press the DISPLAY button on the remote control, ID3
information (song title and artist) will be displayed or
"NO TITLE/NO ALBUM/NO ARTIST" if there is no ID3
information. Press this button again, the title, album, or
artist, track and playing time will be displayed.
4. When playing MP3/WMA discs, the current album and
track will be displayed.
5. Press the / buttons to select the previous/
next track. When pressing the
few seconds, it will search backward or search forward.
6. Press the ALB+ or ALB- button on the remote control
to select the next/previous album, and play the first track
of this album.
If the playing has ended, press the ALB+ or ALB-
button on the remote control to select the next/ previous
album.
Then choose the track with the
7. Press the button to start playing the disc.
8. Press the button to stop playback.
Note: Play will continue to the final track when the
selected tracks have been played.
The first 2 digits of the display is the album number,
the next 3 digits is the track number and the remaining
digits display the minutes and seconds.

Playing Repeatedly (MP3 disc)

ONE, ALB and ALL repeat play can be set by pressing
the MODE button.
First press: To repeat the same track, the words "TRK"
and "REP" will blink.
Second press: To repeat playing album, the words "TRK"
will stay lit and "REP ALB" will blink.
Third press: To repeat playing all tracks on a disc, the
words "TRK" will stay lit and "REP ALL " will blink.
-Third Press: To play tracks randomly,the word "SHUF"
will blink.
-Fourth Press: Return to the normal playback state.
• Repeat A-B can be set by pressing the repeat A-B
button.
33
All manuals and user guides at all-guides.com
First press : Select the start point, the words "A-" will
stay lit.
Second press : Select the end point, the words "A-B"
will stay lit.
Third press : To cancel repeat play, the words "A-B" will
disappear.
Note: A-B repeat function can only be used within the
same track.

Use the USB

By connecting an USB mass storage device (including
USB flash memory, USB flash players or memory cards)
/ buttons for a
to this unit, you can enjoy the device's stored music
through the unit.
1. Insert the USB device's USB plug into the socket on
the front of unit.
2. Press the USB button on remote control or rotate the
SOURCE select button on the Amplifier to select the
USB function. The word "USB" will be displayed on the
front panel.
or button.
3. The device stored music will be played automatically.
4. When you store more than one folder in the USB
flash, use the ALB+ or ALB- button on the remote
control to select the next/previous folder. Then choose
the track with the
5. The player support the USB music file format of MP3,
WMA only.
For devices with USB Cables:
1. Insert one plug of the USB cable (not supplied) to the
socket on the unit.
2. Insert the other plug of the USB cable to the USB
output terminal of the USB device.
For memory Cards:
1. Insert the memory card into a card reader (not
supplied).
2. Use a USB cable (not supplied) to connect the card
reader into the socket on the unit.
USB Storage Device Data Protection
• Always insert the USB device in the correct direction.
Failure to do so may result in damage to the USB device
and this unit.
• Do not remove the USB device while it is being
accessed.
or button to play the folder.
CD Microsystem