CoolFun CD28
2.2
Operating the device safely
DANGER!
D
Do not touch exposed cables with your bare hands. This
especially applies when operating the device with an AC mains
power supply.
CAUTION!
!
Before starting the device, ensure that the power supply line
and the plug are dry.
NOTICE!
A
Do not use electrical devices inside the cooler unless they are
recommended by the manufacturer for the purpose.
Do not place the device near naked flames or other heat
sources (heaters, direct sunlight, gas ovens etc.).
Danger of overheating!
Ensure at all times that there is sufficient ventilation so that the
heat that arises during operation does not build up. Make sure
that the device is sufficiently far away from walls and other
objects so that the air can circulate.
Ensure that the ventilation slots are not covered.
Do not fill the inner container with ice or fluid.
Never immerse the device in water.
Protect the device and the cable against heat and moisture.
3
Intended use
The cooling device can be used to cool and keep foodstuffs warm. It
is possible to change between the heating and cooling operation by
means of a switch.
The device is designed to be operated from a 12-Vg on-board
supply socket of a vehicle (e.g. cigarette lighter), boat or caravan as
well as from a 220–240 Vw AC mains
The appliance may also be used for camping use. The appliance shall not to
be exposed to rain.
CAUTION! Health hazard!
!
If you wish to cool medicines, please check if the cooling capacity
of the device is suitable for the medicine in question.
All manuals and user guides at all-guides.com
Intended use
19