Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Please read and follow all of the instructions & safety precautions detailed below prior to using this
product. Failure to do so may result in serious personal injury and / or property damage.
Do not expose this product to heat sources (including open flame or direct sunlight)
Do not expose this product to water or liquids. If liquid enters the product, immediately unplug
the product from any connected power sources or devices.
Do not disassemble or modify the product
Avoid dropping this product (or any other heavy impact which might damage the internal
circuit)
In the unlikely event of any abnormalities (such as strange odor, overheating, leaking, color
change, etc.),discontinue use immediately.
Avoid cleaning this product using liquids or chemical substances (use dry cloth only)
Only use attachments/accessories specified by the manufacturer
Dispose of this item properly (do not dispose of it in trash receptacles and do not attempt to
incinerate it)
Do not leave this product unattended while it is in use or while it is being charged
This product is not a toy: KEEP AWAY FROM CHILDREN
Only re-charge this device using a USB port wall adapter (not included)
Do not re-charge via USB port on a computer
Do not use this product while it is being charged
When not being used for prolonged periods of time please charge every 3 months to avoid
damaging the battery
The T248 is a practical Wireless 4.0 speaker. Please see below product specifications & instructions.
T248 Specifications
Battery Type: Grade A Lithium Polymer
Battery Duration/Lifespan: 400 times
Capacity: 300 mAh
Power Input & Current: 5V/0.5A
Sound Output: 3Wx1
Sensitivity: 80 dB
Frequency Response: 90Hz - 20KHz
Distortion Rate: <10%
All manuals and user guides at all-guides.com
WARNING
Safety Precautions
T248 User Manual

Publicidad

loading

Resumen de contenidos para Spectech T248

  • Página 1 When not being used for prolonged periods of time please charge every 3 months to avoid damaging the battery T248 User Manual The T248 is a practical Wireless 4.0 speaker. Please see below product specifications & instructions. T248 Specifications Battery Type: Grade A Lithium Polymer...
  • Página 2 Wireless Pairing 1. Once T248 has been turned ON, enable Bluetooth function on your electronic device. 2. Search Bluetooth signal Spector T248 & pair your device (Blue LED on T248 will remain lit to indicate the devices are paired) 3. White LED will flash slowly when in Wireless mode...
  • Página 3 4. Skipping songs must be controlled directly on your audio device To Charge the T248 1. Insert micro USB into the T248 & connect the USB output to a wall adapter (not included) 2. Red LED indicates the device is charging (Red LED will turn OFF once fully charged...
  • Página 4 Si le produit ne s’utilise pendant des périodes de temps prolongées il faut le charger tous les trois mois pour éviter d’endommager la batterie. Manuel de l’utilisateur du T248 Le T248 est un pratique haut-parleur sans fil 4.0. Veuillez lire ci-dessous les spécifications du produit et le mode d’emploi Spécifications du T248 Type de batterie : Lithium polymère rechargeable grade A...
  • Página 5 2. Lumière LED blanche clignotera rapidement pour signaler que le haut parleur est prêt à l’appariement Sans Fil (Le haut parleur peut aussi se connecter manuellement par la sortie 3.5mm AUX) NOTE: Les dispositifs appairés préalablement s’apparieront automatiquement avec le haut parleur T248 3. Éteindre: Interrupteur ON/OFF Bouton OFF...
  • Página 6 4. Sauter chansons : doit se contrôler directement du dispositif audio. Chargement du T248 1. Insérer micro USB dans le T248 et connecter la sortie USB à un adaptateur de prise murale (non inclus). 2. Lumière LED rouge signale que le dispositif est en cours de chargement (LED rouge...
  • Página 7 Si el producto no se utiliza por largos periodos de tiempo, hay que cargarlo cada 3 meses para evitar dañar la batería. Manual del usuario del T248 El T248 es un práctico parlante inalámbrico 4.0. Sírvase leer a continuación las especificaciones e instrucciones del producto. Especificaciones del T248 Tipo de batería: Polímero de litio recargable grado A...
  • Página 8 3. Apagado: interruptor ON/OFF botón OFF Apareamiento inalámbrico 1. Una vez que el T248 está encendido activar la función Bluetooth en el dispositivo electrónico. 2. Buscar la señal Bluetooth Spector T248 y aparear el dispositivo (LED azul del T248 permanecerá encendida para señalar que los dispositivos están apareados).
  • Página 9 4. Saltar canciones: debe controlarse directamente del dispositivo audio. Carga del T248 1. Insertar micro USB en el T248 y conectar salida USB a un adaptador de toma de corriente mural (no incluido). 2. Luz LED roja señala que el dispositivo está cargando (LED roja se apagará una vez que la...