Be Cool Push Manual Del Usuario página 21

INSTRUCTIONS FOR ASSEMBLY AND USE
ASSEMBLY METHOD
•Pull up the handle bar as arrow showed , there is "click " voice
after unfold the frame (Figure 1).
•Put the rear wheels into the axle hole until fully plug in (Figure 2).
•Adjust the backrest to the most upright position as (Figure 3).
•Put the seat into joint holder of stroller frame (Figure 4).
•Put the bumper bar into slot (Figure 5).
•Clench press button on the handle bar to adjust the length of
handle bar (Figure 6).
INSTRUCTIONS
Adjusting the backrest
•Pull up the backrest button to adjust (Figures 7-8).
Adjusting the footrest
•Press the two buttons on the footrest to adjust the footrest with
two hands (Figure 9).
Using the brakes
•Braking downward, unbraking upward (Figure 10).
Fitting the seat unit (parent facing and forward facing)
•Pull up the seat release button, take out the backrest and reverse,
then put the seat into joint holder (Figures 11-12).
Using the harness buckles as (Figures 13-14)
Adjusting the harness system
•According to the height of child to adjust the harness as figures 15-16.
•Release harness webbing as Figure 17.
•Tense the harness webbing as Figure 18.
•Adjusting the backrest safety webbing (Figure 19).
•Adjusting the crotch webbing (Figure 20).
FABRIC DISASSEMBLY
•Open all snap button to take o fabric (Figures 21-22).
FOLDING METHOD
•Pull the second lock button with one hand , and press the backrest
button to adjust the backrest to the most recline position.
•Two hands to press the button on the footrest, adjust the footrest
to lowest position.
•Hold the handle bar to hit downward to fold stroller.
•Hold the handle bar to adjust to the lowest position.
HOLD THE HANDLE BAR TO HIT DOWNWARD TO FOLD STROLLER
Maintenance declaration:
•When you find any issue or problems after you buy this product,
please contact our distributor first time, our distributor will service
you immediately.
•When can't contact distributor, or the service not satisfied, please
contact National service hotline: +34 93 703 18 00
•Maintenance service: Manufactures maintenance, Express main-
tenance, Phone call maintenance.
EN
21