Battery Charging And Activation - Jeep 2xe ADVENTURER 2021 Manual Del Usuario

Prior to using the item for the first time, charge to 100%. Ensure the item, charger, and
charging port are dry.
Instructions
Open the kickstand
Switch off the scooter
MODEL REFERENCE PICTURE
2xe
ADVENTURER
2xe URBAN
CAMOU
CAUTION
To recharge the item, use the battery charger supplied ONLY
MODEL
2xe ADVENTURER
2xe URBAN CAMOU
Using another type of charger may damage the scooter or entail other potential risks.
Never leave the product unsupervised while it is charging. Do not ride the item while
charging.
After each use, fully recharge the battery to extend its useful life. Do not recharge the item
immediately after use. Allow the scooter to cool for an hour before recharging.

4. Battery charging and activation

BATTERY CHARGER MODEL
HVE063-4200150
HVE126-5460200
OUTPUT VOLTAGE
42V – 1.5A
54.6V – 2.0A
14
INSTRUCTIONS
- Remove the rubber cover
from the charging socket
- Connect the battery
charger to the charging
port and then to the power
socket.
- When the item is fully
charged, the light on the
charger changes from
red (charging) to green
(charging complete).
- After charging, close
the rubber cover on the
charging socket
- Unplug the battery
charger from the power
socket
RECHARGE TIME
7 h
5 h