System Menu - TECshow MADBOX PLUS Manual De Usuario

6. SYSTEM MENU

Menu Chart
ADDR
CHND
SLND
SHND
SOUD
SENS
BLND
LED
DISP
TEST
VER
LOAD
To access the main menu press the MENU button.
Press the UP or DOWN buttons until you reach func-
tion you wish to change. When you reach the func-
tion you wish to change press the ENTER button.
When a function is selected use the UP or DOWN
buttons to change the function settings. Once your
changes are made press the ENTER button, and
then press and hold the MENU button for at least
three seconds to confirm and lock the change into
the system memory. If the MENU button is not
pressed and held within eight seconds the fixture
will automatically confirm and lock the change into
the system memory. To exit without making any
changes press the MENU button.
ADDR - DMX Address Setting.
1. Press the MENU button until "ADDR" is dis-
played, press ENTER.
2. The current address will now be displayed and
flashing. Press the UP or DOWN buttons to find
your desired address.
3. Press ENTER to confirm. Then connect your
DMX Controller.
P. 6
Tecshow Madbox Plus | English version
A001 - A512, DMX Address setting
14CH, 18CH(DMX Channel Mode)
MAST, SLAV, master/slave choose
SOUN, AUTO1-AUTO9
ON, OFF, sound control
000 – 100 Sound sensitivity control (0 close, 100 The most sensitive)
YES, NO, Standby mode
ON, OFF (Backlight ON/OFF)
NO/YES(Reverse Display)
Auto Test
V104 Software version
YES, NO, Restore the factory setting
CHND - DMX Channel for you Choose.
1. Press the MENU button until "ADDR" is dis-
played, press ENTER.
2. The current address will now be displayed and
flashing. Press the UP or DOWN buttons to find
your desired address.
3. Press ENTER to confirm. Then connect your
DMX Controller.
SLND - Master/Slaver selection
1. Press the MENU button until "SLND" is dis-
played, press ENTER. Either "MAST" or "SLAV"
will be displayed.
2. Press the UP or DOWN buttons until your de-
sired setting is displayed, and press ENTER to
confirm.
SHND- Auto or Sound control for you choose
1. Press the MENU button until "SHND" is dis-
played, press ENTER. There will display "SOUN"
or "AUTO1" - "AUTO9"
2. Press the UP or DOWN buttons until your de-
sired setting is displayed, and press ENTER to
confirm.