Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

All manuals and user guides at all-guides.com
TROUBLE SHOOTING GUIDE
Symptom
Possible Problem
AC Adaptor is not plugged
into a wall outlet or the
The unit does not
connector is not plugged
respond (no
into the power supply jack
power)
on the back of the unit.
Wall outlet is not functioning. Plug another device into the same
iPod/iPhone is not installed
properly.
iPod/iPhone does
not dock properly
iPod/iPhone is not installed
properly.
iPod/iPhone does
not respond to the
Your iPod/iPhone is frozen
speaker system
iPod/iPhone is not installed
properly.
iPod/iPhone does
not charge up
iPod/iPhone is frozen or its
battery has developed a
problem.
The listening FM station not
Noise or distorted
tuned in properly.
sound on FM
The FM Wire Antenna is not
broadcast
fully extended.
Output sound is
Volume level is set too high.
distorted
Sound source is distorted.
Unit gets warm
This is normal
after extended
play at high
volume
Solution
Plug the AC adaptor into a wall outlet
and plug the connector into the supply
jack on the unit.
outlet to confirm the outlet is working.
Remove your iPod/iPhone from the
dock and check for obstruction on the
connectorsin the dock and on your
iPod/iPhone. Then carefully reseat it
in the dock.
Remove your iPod/iPhone from the
dock and check for obstruction on the
connectors in the dock and on your
iPod/iPhone. Then carefully reseat it
on the dock.
Please make sure that your
iPod/iPhone is working properly
before docking into the unit. Please
refer to your iPod/iPhone user manual
for details of resetting.
Remove your iPod/iPhone from the
dock and check for obstruction on the
connectors in the dock and on your
iPod/iPhone. Then carefully reseat it
in the dock.
Please make sure that your
iPod/iPhone is working properly
before docking into the unit. Please
refer to your iPod/iPhone user manual
for details of resetting or servicing.
Retune the FM broadcast station.
Fully extend the FM Wire Antenna.
Decrease the volume level.
If the original sound source is of poor
quality, distortion and noise will be
more prominent with high-power
speakers. Try a better audio source
such as a music CD.
If you are using an external sound
source like older generation of iPod,
try reducing the output volume on the
device itself. Also try turning bass
boost OFF or change to a different
EQ setting.
Turn the unit off for a period of time or
lowert he volume.
20

Publicidad

Tabla de contenido
loading

Tabla de contenido