Publicidad
C A R D I G A N
OUTDOOR HANGING PENDANT
LÁMPARA COLGANTE PARA EXTERIORES
LUMINAIRE SUSPENDU D'EXTÉRIEUR
SKU: 440635
INSTALLATION
INSTALACIÓN
INSTALLATION
1. Shut off the power at the circuit breaker and
remove old fixture, including the crossbar.
1. Corte la energía desde el disyuntor y quite el accesorio
viejo con todo y la barra.
1. Coupez le courantauniveau du disjoncteur et
retirezl'anciennelampe, y compris la barre transversale.
2. Carefully unpack your new fixture and lay out all the
parts on a clear area. Take care not to lose any small
parts necessary for installation.
2. Desempaque cuidadosamente su nuevo accesorio y
extienda las partes en un área libre. Ponga cuidado en no
perder ninguna de las partes pequeñas necesarias para la
instalación.
2. Déballezsoigneusementvotrenouvellelampem
urale et étaleztoutes les pièces sur une surfacedégagée.
Faites attention à ne pas perdre les
Connect Black or Red
Supply Wire (Lead Wire) to:
Black wire
* Parallel wire
(round or smooth)
Clear, brown, gold or black
wire without tracer
Insulated wire (other than green)
with copper conductor
* When parallel wires are used,
the neutral wire is ridged down its
length and the other wire is round
and smooth (see illus.).
3. Attach the cross bar (B) to the outlet box (A)
(not supplied) using the 2 screws provided with the
outlet box (A).
3. Adjunte la barra transversal (B) a la caja de
tomacorrientes (A) (no incluida) usando 2 tornillos que se
proporcionan con la caja de tomacorrientes (A).
3. Fixez la barre transversale (B) à la boîte à prises (A)
(non fournie) à l'aide des 2 vis fournies avec la boîte à
prises (A).
4. CONNECTING THE WIRES
Now connect the electrical wires as follows: Connect
the smooth wire from the fixture to the black or red
(lead) supply wire. Connect the ridged wire from the
fixture to the white (neutral) supply wire. Make sure all
wire nuts are secured. You may wrap the connections
with electrical tape. If your outlet has a ground wire
(green or bare copper), connect fixture's ground wire
to it. Otherwise, connect fixture's ground wire directly
to the crossbar using the green screw provided.
Tuck the wire
3
Connect White Supply
Wire (Neutral Wire) to:
White wire
* Parallel wire
(square or ridged)
Clear, brown, gold or black
wire with tracer
Insulated wire (other than green)
with silver conductor
Neutral Wire
1.855.715.1800
Publicidad
