JANE CONCORD TRANSFORMER iPLUS Manual Del Usuario página 33

Make sure the belt passes inside the securing hook. 4.b
Now press the size adjustment button (05) on the back of the backrest and keep
it pressed whilst moving the head section (01) into the required position. The
TRANSFORMER can be continuously adjusted to the right size and is locked into the
current position when the adjustment button (05) is released. 4.c
The shoulder belt guide (07) should be slightly
above the top of the child's shoulder. At the same
time, the shoulder belt should pass centrally
between the child's neck and the outer edge of
the shoulder.
Pull the belt taut so that the lap belt and diagonal belt are well positioned and ensure
that the belts are not twisted. The lap belt should be in the lowest possible position.
If your vehicle is fitted with a seat belt height adjuster, adjust its height accordingly.
When you wish to release the child from the seat, all you need to do is open the lock
and pass the strap back across the child. To remove the shoulder belt from the guide,
press the shoulder belt locking button (06) and pull the belt forwards and out.
EN
31