Midwest Feline Nuvo 138E-BK Instrucciones De Armado página 3

4. Attach the pre-assembled Square Perch and Short
Tube to the Base using one of the Long Hardware
Screws with Washers (B) to the base. Insert the Screw
and Washer from the bottom of the Platform. Tighten
with Allen Wrench (M).
5.
Attach the pre-assembled Long Tube and Middle
Platform to the Base, using the remaining Long
Hardware Screw with Washer (B). Insert the Screw and
Washer from bottom of platform. Tighten with Allen
Wrench (M).
Insert a Dual Long Thread Screw with Even Threads
6.
(H) on top of Middle Platform. The Dual Thread Screw
will attach the Middle Platform and Long Tube
together. Tighten screw until bottom threads disappear
and only top are visible above Middle Platform.
Attach the Medium Long Sisal-Wrapped Tube (E) to
7.
the top of the Small Middle Platform. Tube will fit on
top of open screw (from Step 6), use hands to tighten.
Screw a Short Dual Thread Screw with Even Threads
8.
(I) into the top of the Medium Long Sisal-Wrapped
Tube (from step 7). Tighten until bottom threads
disappear and only top threads are visible. Attach the
Top Bolstered Perch (L) to the Medium Long Tube.
Perch fits on top of Short Dual Thread Screw and
tightens by turning in circular motion.
Dual Long Threaded Screw
with Even Threads
Step 5
Step 7
Step 8
Step 6
Step 4