Symbols Explanation; Intended Use; 3�1 Performance; Air System Requirements - AmazonBasics B087RJK3GQ Manual Original

2. Symbols Explanation

Read this user manual carefully
before use�
Wear ear protection,
compliant to:
ANSI/ASA S12�6
Wear eye protection,
compliant to:
ANSI Z87�1
Wear dust protection,
compliant to:
NIOSH (42 CFR 84)
Wear protective gloves,
compliant to:
ANSI/ISEA 105

4. Air System Requirements

» Use only clean, dry, regulated
compressed air as a power source�
» Air compressors used to drive this tool
must comply with the applicable laws and
regulations�

3. Intended Use

» This pneumatic tool is intended for use in
household and light industrial locations�
It can only be used by skilled, trained
professionals in accordance with the
instructions in this user manual�
» This pneumatic tool is designed to be
used with a sanding disc or other shaft
mounted abrasive tool for sanding
metals, wood, stone, plastics and other
materials� It should only be used for
such sanding applications and within
its marked capacity and ratings� Only
accessories specifically recommended
in this user manual should be used with
this tool� Use in any other manner or with
other accessories could lead to unsafe
operating conditions�
» No liability will be accepted for damages
resulting from improper use or non-
compliance with these instructions�
3.1 Performance
» Factors outside the tool may effect
its operation and efficiency such as
reduced compressor output, excessive
air demand from the air line, moisture
or restrictions in the air line, or the use
of connectors of improper size or poor
condition which will reduce air supply�
NOTICE
Light industrial applications
must follow Occupational Safety and
Health Administration requirements�
» A build-up of moisture or oil in the
air compressor will accelerate wear
and corrosion in the tool� Ensure any
moisture is drained from the compressor
daily and the inlet filter is kept clean�
Thoroughly read the user manual of the
air compressor or other power source�
EN
9