Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
KEEP MACHINE CLEAN
Periodically blow out all air passages with dry compressed
air. All plastic parts should be cleaned with a soft damp
cloth. NEVER use solvents to clean plastic parts. They
could possibly dissolve or otherwise damage the material.
Wear certified safety equipment for eye,
hearing and respiratory protection while
using compressed air.
FAILURE TO START
Should your machine fail to start, check to make sure
the prongs on the cord plug are making good contact
in the outlet. Also, check for blown fuses or open circuit
breakers in the line.
LUBRICATION & RUST PROTECTION
Apply household floor paste wax to the machine table
REPLACEMENT PARTS
Use only identical replacement parts. For a parts list or to
order parts, visit our website at servicenet.deltamachinery.
com. You can also order parts from your nearest factory-
owned branch, or by calling our Customer Care Center at
1-800-223-7278 to receive personalized support from highly-
trained technicians.
SERVICE AND REPAIRS
All quality tools will eventually require servicing and/or
replacement of parts. For information about Delta Machinery,
its factory-owned branches, or an Authorized Warranty
A complete line of accessories is available from your Delta Supplier, Porter-Cable • Delta Factory Service Centers, and
Delta Authorized Service Stations. Please visit our Web Site www.deltamachinery.com for a catalog or for the name of
your nearest supplier.
Since accessories other than those offered by Delta have not been tested with this product, use
of such accessories could be hazardous. For safest operation, only Delta recommended accessories should be
used with this product.
All manuals and user guides at all-guides.com
MAINTENANCE
SERVICE
ACCESSORIES
31
and extension table or other work surface weekly. Or use
a commercially available protective product designed for
this purpose. Follow the manufacturer's instructions for
use and safety.
To clean cast iron tables of rust, you will need the
following materials: a pushblock from a jointer, a sheet
of medium Scotch-Brite™ Blending Hand Pad, a can of
WD-40 ® and a can of degreaser. Apply the WD-40 and
polish the table surface with the Scotch-Brite pad using
the pushblock as a holddown. Degrease the table, then
apply the protective product as described above.
BLADE RAISING AND BEVELING
If the blade raising and leveling mechanisms become
difficult to operate, clean sawdust from the worm and
sector gears (shown in Fig. 71). Apply a graphite-based
lubricant that will not attract and hold dust.
Service Center, visit our website at www.deltamachinery.
com or call our Customer Care Center at 1-800-223-7278.
All repairs made by our service centers are fully guaranteed
against defective material and workmanship. We cannot
guarantee repairs made or attempted by others.
You can also write to us for information at Delta Machinery,
4825 Highway 45 North, Jackson, Tennessee 38305 -
Attention: Product Service. Be sure to include all of the
information shown on the nameplate of your tool (model
number, type, serial number, etc.)
Publicidad
Tabla de contenido
