3.2 Remote Installation
Remove the insulating tab from the end of the battery and
check that the battery is installed correctly
Troubleshooting tips:
Replace the battery
•
Make sure the Switch is turned on and remote control
•
is not turned off on the Switch
3.3 Connection Instructions
1)
Power off all source equipment
2)
Make sure the switch is "OFF" before connecting any de-
vice
3)
Check if external power is required to the connected devic-
es
for operation
4)
Connect the switch box to up to 4 USB-equipped comput-
ers with the provided Micro USB to USB A Cable
5)
Connect the switch box to up to 4 USB peripherals through
the USB-A ports
4-Port USB 3.0 Switch with Remote Control
www.cablematters.com
5