Use Of The Device - Project E Beauty PE098 Manual Del Usuario

Charging
This device can be used connected to AC or can be charged to be
used without the AC cord. To plug in and charge the unit, perform
the following:
1
Plug the Adapter's plug into the
Power jack on the bottom of
the device.
For charging:
Simply Connect the USB cable
to common 5V USB power
source Connect the cable to the
charging jack on the massager.
Notes:
Recharge when the device stops working.
When the device is turned on, it emits a beep every 10 seconds
to alert you that the unit is on.
This unit has an auto shut o that will turn the unit o after 10
minutes. It will beep rapidly when 10 seconds are left.
The device will take approximately 2.5 hours for a full charge and
can be used for approximately 10 treatments (10 minutes each).
14

Use of the Device