Maintenance; Service; Troubleshooting - MAGNAFLUX L-10 Manual De Instrucciones

MAINTENANCE

Cleaning:
•
Use mild soap and a damp cloth to clean the coil housing
•
Do not spray coil housing or immerse any part of coil in liquid

SERVICE

TROUBLESHOOTING

Problem Possible Cause
Coil will not Cord unplugged
energize
Damaged or defective cord
Damaged or defective switch
Debris built up in switch
housing or under switch cover
Blown fuse or breaker in
power supply
Defective extension cord
Tripped GFI
Coil will not Debris built up around switch
de-energize housing cover
Weaker than Extension cord too light to
normal field supply adequate current
WARNING
Disconnect coil from line power before any disassembly or service.
CAUTION
To assure product safety and reliability, repairs should be performed
by Magnaflux Authorized Service Center using original parts.
Possible Solution
Plug cord into a fully grounded outlet or
extension cord
Contact Authorized Magnaflux Service Center
Contact Authorized Magnaflux Service Center
UNPLUG POWER CORD. Remove two
screws at back of switch cover. Remove
cover. Clean with a soft wooden or plastic
brush and reassemble.
Reset breaker or replace fuse
Replace extension cord
Reset GFI button
UNPLUG POWER CORD. Remove two
screws at back of switch cover. Remove
cover. Clean with a soft wooden or plastic
brush and reassemble.
See table in precautions section for
proper size
L-10 Coil Operating Manual
4