Porta-filter
retention clip
2.2. Product usage
For the first use
Cleaning and preparing the unit prior to first use.
Please refer to the "2. 1 Product Description" section to familiarize
yourself with the product and all its parts.
1. Make sure the unit is off "O" by pressing the power button located on
the side. Make sure it is unplugged from the electrical outlet.
2. Remove stickers and labels from the unit.
3. Start by removing and then washing the water reservoir, the milk
reservoir, the porta-filter, the three filters and measuring scoop in a
mixture of mild detergent and water. Rinse each thoroughly and place
them back into the unit.
4. Refer to the instructions on "Placing the porta-filter" section
before placing or removing the porta-filter and filter from the unit.
ATTENTION: The water tank has an orange safety valve that must be
removed.
5. To clean the inside of the appliance, follow the steps listed on the
"2.3. Maintenance" section using water in both reservoirs and no coffee
in the filter. Do not immerse the appliance in water or attempt to reach
any of its internal parts.
NOTE: In order for your unit to work properly time after time, clean it
after every use.
IMPORTANT – Preparing the unit
To prepare the unit, run the steam cycle for 90 seconds by following
the steps below:
1. Fill the water reservoir between the "Min" and "Max" levels.
2. Fill the milk reservoir with milk between the "Min" and "Max" levels.
3. Select one of the filters and place it on the porta-filter. Place the
porta-filter in the unit ensuring it is properly locked and place a cup
Multifunction Espresso Machine | Cafetera Expreso Multifunciones |
Filter for single shot
of espresso
Máquina de Café Expresso Multifunções
Filter for double
shot of espresso
Measuring scoop/tamper
EN
11