EN
B-2
Wiping with a cloth
Slightly dirty
Soak a piece of cloth in cold or lukewarm water, wring well and wipe
away dirt completely.
Stubborn dirty
Wipe off dirt with a piece of cloth impregnated with appropriately diluted
neutral bath cleaner, then blot up any residual dirt and water with a dry
piece of cloth.
Notes
Do not apply excessive loads to the faucet.
Otherwise, the faucet may bend or break, whereby causing damage like
water leaks, etc.
Do not use the materials that may break the faucet.
・Acidic detergents, chlorine bleaches and alkali detergents
The faucet surface may discolor or the plastic part(s) may break.
・Solvents such as thinner, benzine, etc.
Rubber and plastic part(s) may break.
・Detergents that contain coarse particles such as cleansers, polishing
powders, etc.
・Nylon scrubbers, scrubbers, brushes, etc.
The faucet surface may be damaged.
Specifications
Operating pressure range : max
Recommended Operating pressure :
Test pressure :
Hot water temperature :
Recommended hot water temperature :
Rate of low by 0.3Mpa :
: min
approx 5.0 L/min
28
1.0 MPa
0.1 MPa
0.1 - 0.5 MPa
1.6 MPa
max. 80 °C
60 °C