Installation - Newlux SecaDry v150 XXL UV Manual Del Usuario

inStallatiOn

1. On a flat surface, assemble the upper and lower shelfs, connecting
the pieces to one another, following the drawing shown below:
Upper shelf
Connect the horizontal tubes (F)
directly into the plastic shelf hole (A).
2. Connect the lower vertical tubes (G) into the four corners of the
lower shelf (C), following the drawing. Then, place the outer cover
of the dryer using the four vertical tubes, using the four lower holes.
3. To assemble the structure, connect the lower vertical tubes (G) and
the middle level plastic shelves (B), as shown in the drawing. Repeat
the same process for the upper vertical tubes (D) and connect the
upper shelf (A) previously assembled in step 1. Finally, connect the
8 middle horizontal suspended tubes (E) on the middle and lower
shelfs.
| 20
Lower fixed shelf
Connect the lower shelf (C), the
horizontal tubes (F) and the four
wheels (I) directly into the shelf hole.
Lower fixed
shelf
Outer cover (case)
Air vent