Uline TORNADO H-9934 Manual Del Usuario página 5

5. Push top of bag collar upward until collar snaps into
place. (See Figure 13)
Figure 13
6. Tuck bag corners into bag compartment and zip
bag compartment closed.
REMOVING AND REINSTALLING BATTERY
IMPORTANT! Turn off vacuum. If battery charger
is plugged into the charge point on the vacuum,
remove charger from charge point before
removing battery. Battery can be removed
and charged independently from vacuum.
1. To remove battery, push up on the release button
and lift off battery. (See Figure 14)
Figure 14
Release
Button
2. To replace battery, align bottom of battery with
posts at base of coupling. Push battery in until it
clicks into place. (See Figure 15)
Figure 15
Battery
Posts
PAGE 5 OF 21
MAINTENANCE
REMOVING BOTTOM PLATE
CAUTION! To reduce the risk of electrical shock
or injury from moving parts, turn the vacuum
off and remove the battery before servicing or
cleaning the vacuum.
1. Ensure vacuum is turned off and remove battery.
2. Press handle release pedal to place vacuum in
the flat position.
3. Turn the vacuum over, exposing the bottom plate.
4. Turn two screws a quarter turn counterclockwise to
release the bottom plate and remove. (See Figure 16)
Figure 16
REINSTALLING BOTTOM PLATE
1. Align front edge of the bottom plate into notches
inside the nozzle. (See Figure 17)
Figure 17
Bottom
Plate
2. Press bottom plate into position until the plate clicks
on both sides. Tighten the two screws a quarter turn
to secure the bottom plate.
3. Replace the battery.
0122 IH-9934