Operation; Cleaning Your Teeth - Silk’n SONICYOU DCA02 Manual De Usuario

The bottom indicator light stops flashing and stays lit when the
charging level reaches 30 %.
The middle indicator light stops flashing and stays lit when the
charging level reaches 70 %.
All three indicator lights stay lit when the charging level
reaches 100 %.
4. When charging is done, unplug the USB cable from the
charging port and the USB power source.
5. Securely close the two protective covers. Make sure the
protective covers are completely closed to stop the charging
port from getting wet.

6 Operation

• The product is equipped with three modes: "Sensitive",
"Clean" and "White". When using the product for the
first time, start with the "Sensitive" mode (with the lowest
vibration frequency) before changing to other modes.
• The product remembers your last selected mode for
your next use.
• You can check the battery indicator lights
remaining battery power level during operation:
Three lights: 71–100 %, two lights: 31–70 %,
one light: 0–30 %
Recharge the product when the bottom battery
indicator light flashes during operation (see chapter
"Charging").

6.1 Cleaning your teeth

1. Attach a suitable brush head
chapter "Replacing the brush head").
Clean the brush head before first use as described in the
chapter "Cleaning".
2. Hold the brush head under running water for a moment to
make it wet.
3. Apply toothpaste to the brush head.
4. Carefully move the brush head up to your teeth.
5. Press the operation button
The product is now switched on in the "Sensitive" mode. It is
suitable for a gentle yet thorough clean of sensitive teeth and
/ to the product (see
1 6
once.
2
EN
for the
4
12