JANE 30612 Manual Del Usuario página 5

EN
BALANCE BIKE
READ THESE SAFETY INSTRUCTIONS CAREFULLY AND SAVE THEM FOR FUTURE
REFERENCE
The balance bike is suitable for children 24 months and older.
This bike is designed to improve a child's coordination and balance while having fun. Balance bikes also teach
kids to ride a normal bike. Parents or guardians should properly instruct children on how to use this toy bike. This
toy should only be used under adult supervision. To avoid possible injury, children using the BABYCLE must wear
a helmet, knee and elbow pads. Riding this BABYCLE on public roads, near steps, stairs, slopes, ponds or other
dangerous areas is prohibited.
For the safety of the child, regular maintenance of the BABYCLE pedal-less bike is necessary. Wheels, steering and
axles should be checked by an adult before use.
WARNING!
This bike must only be assembled and disassembled by an adult.
Use outdoors:
Never use on stairs.
Never use on public roads, highways, etc.
Never use while pulling another vehicle or being pulled by another vehicle.
Use this toy on level surfaces.
Make sure the child has learned to brake, push and steer properly before using the BABYCLE.
Always use in the company of an adult.
To prevent possible injury, the child using the BABYCLE bicycle must wear a helmet, gloves, and knee and elbow
pads.
Maximum weight: 30 kg.
This product is a toy. Teach your child to use it correctly and warn him/her about possible sources of danger.
This toy should be used with caution, since it requires a certain level of dexterity to prevent crashes that could
result in injury to the user or third parties.
Remove all packaging before giving the toy to the child.
Details and colours may di er from those shown in the pictures on the box.
Please contact the Jané Group if any item is missing or broken.
Assembly and maintenance
The BABYCLE is pre-assembled by the supplier. The seat is in the lowest position in the beginner version. The
steering rod must be tightened with the accessory bolts (see drawings on the right).
Warning. Excess force should not be used in tightening these screws. The recommended tightening torque is 1
Nm.
The wheels of the BABYCLE are not in atable and therefore should not be pumped with air.
To adjust the seat height, remove the two long screws and change the position of the steering rod. Then replace
and tighten the screws.
The BABYCLE is made of natural birch wood with EVA rubber parts, so store properly when not in use. Do not
expose it to the elements. Keep it from getting wet and do not soak it in water. To clean it, wipe it with a dry cloth
moistened with a neutral soapy solution.
Do not use chemical products.
Made in China, designed in Spain.