Technical Specifications; Maintenance - CEVIK PRO CE-M1800PRO Manual De Instrucciones

EN

5. TECHNICAL SPECIFICATIONS.

TECHNICAL DATA.
Voltage / Frequency:
Absorbed power:
Adjustable speed, no load (Gear 1):
Adjustable speed, no load (Gear 2):
Rod connection:
Maximum mixing volume:
Rod mixing disc diameter:
Mixer Weight (without rod):
Insulation class:
Degree of protection:
Sound pressure level LpA:
Sound power level LwA:
Vibration level on handles:
(*) It does not offer protection against water. Do not use in the rain.
WARNING!: Always wear ear protection when sound pressure exceeds 85 dB (A). The declared
total vibration value has been measured according to a standardized test method and can be used to
compare one machine with another. It can also be used in a preliminary exposure assessment.
6. MANTEINANCE.
•
Disconnect the plug before performing maintenance or repair on the machine.
•
Keep the machine's vents clean to avoid overheating the motor.
•
Clean the machine regularly with a soft cloth, preferably after each use. If there is embedded dirt, use a
cloth dampened with soapy water.
•
Never use solvents such as gasoline, alcohol, ammonia, bleach, etc., as they can damage the plastic
parts.
•
Regularly check the condition of the brushes and if necessary, remove and replace them from their
housing (2). Both brushes should always be changed at the same time.
M1800PRO
1~ 230V. – 50Hz.
1.600W.
From 180 to 400 rpm.
From 300 to 700 rpm.
M14
140 Litres.
140mm.
5,4 Kg.
IPX0 (*)
87,6 dB(A) k=3dB(A)
98,6 dB(A) k=3dB(A)
5,187m/s² k=1,5m/s²
25
II