English - IKEA BETTORP Manual Del Usuario

English

Charger features
• Wirelessly charges 2 Qi-certified devices
simultaneously.
• Certified according to specification Qi 1.2.4BPP.
• Temperature and power monitor for safety.
• LED status indicator.
Instructions for use
• Connect the charger cable to the power adapter
and plug it into the wall socket.
• For wireless charging, place the device to be
charged on top of the plus sign (+). The device
must be placed directly over the plus sign (+) for
the charging function to work optimally. Note
that on some devices you may have to activate
wireless charging in the settings.
• If your battery is completely discharged, it may
take a few minutes before it starts charging. This
is entirely normal. You can see that charging has
begun when the battery symbol appears on your
device.
LED indicator (see illustrations):
1. Power on: LED lights up for 3 seconds.
2. Charging: LED on.
3. Charging completed: LED off.
4. Error: LED flashes.
Good to know
• Devices may get warm during charging. This is
completely normal, and they will gradually cool
down again after they are fully charged.
• Charging time may vary based on the device's
battery capacity, charge level, the age of the
battery and the temperature in the surrounding
area.
• Charger storage temperature: -20°C to 25°C.
• Charger operating temperature: 0°C to 40°C.
• Unplug the charger from the power source
before cleaning and when it is not in use.
• To clean the charger, wipe with a moist cloth.
Never submerge the charger in water.
Recommended precautionary measures and
technical data: See the back of the charger.
Save these instructions for future use.
WARNING:
• Only charge devices that are Qi-certified.
• The wall socket must be located near the
equipment and must be easily accessible.
• Only use in dry locations.
• Only use the included 24.0 V DC adapter with the
wireless charger unit. Other adapters could cause
damage to the unit.
• Children should be supervised to ensure they do
not play with the product.
• Do not subject the units to wet, moist or
excessively dusty environments since this can
cause damage to the units.
• If the cord is damaged, the product should be
disposed of.
Product servicing
Do not attempt to repair this product yourself.
If you open or remove parts, you may expose
yourself to dangerous voltage points or other risks.
RF EXPOSURE INFORMATION
According to RF exposure regulations, under
normal operations the end user shall refrain from
being closer than 10 cm from the device.
Technical data
Type: E2021 BETTORP
Input: 24.0V DC, 0.7A, 18.0W
Type: ICTD-5-BI-3
Input: 19.0-24.0V DC, 0.5A
Operating frequency: 110.1 - 148 kHz
Output power: -2 dBuA/m at 10m (2 x 5.0W)
Power supply unit
Type: ICPSW24-19-1
Input: 100-240 VAC, 50/60 Hz, 0.4A
Output: 24.0V DC
Max total load: 0.8A, 19.0W
(Only EU/UK)
Average active efficiency: 89.1%
Efficiency at low load (10%): 83.0%
No load power consumption: 0.08W
Indoor use only
Manufacturer: IKEA of Sweden AB
Address: Box 702, SE-343 81 Älmhult, SWEDEN
4